WASP, a 3D printer maker has disclosed a collaboration with Technogym. Technogym is a fitness machine provider. The firm is utilizing Delta WASP 400 INDUSTRIAL 4.0 3D printing machine to assist prototype and create fresh pieces of fitness gear.

Technogym purchased a 3D printing machine from WASP while it was seeking to reduce its maintenance costs. This is all while allowing the manufacture of huge prototype pieces.
Because of that WASP 3D printing machine has assisted Technogym to cut its lead times. This is specifically with huge pieces.
Technogym said the following regarding this:
“We chose the Delta WASP 4070 INDUSTRIAL 4.0 system for many reasons, one of the most important is certainly its large print volume feasibility. We also appreciate its printing speed and the much lower cost of support-materials, which allows us to buy more material spools and make more tests.”
Technogym was established in 1983 and it is a provider and maker of gym gear for both fitness and home facilities. The firm was the 2016 Summer Olympics in Rio’s sole supplier. In a move to create items, the Technogym Village headquarters situated in Cesena, Italy is the host to the T-Factory 7 T-Research and Development Department.
This is where more than 130 creators and designers and have made 142 global licenses and 93 trademarks for the firm.
To help develop its products, the Technogym Village headquarters, based in Cesena, Italy, is home to the T-Factory & T-Research and Development Department, where over 130 engineers and designers have produced 142 international patents and 93 brands for the company. The community is meant to be a cradle of ideas, where discovery, data, and fact-finding are shared.
Because of that, the firm has put its Delta WASP 4070 INDUSTRIAL 4.0 3D printer in its T-Factory & T-Research and Development Department. This is where the firm mixes all its production procedures in a single area to assist in nurturing its product pattern.
Most of the firm’s products through the years have thus been prototypes by the use of the WASP 3D printing machine.
In the past, Technogym had a little 3D printing machine that it used to prototype pieces with ABS. But the firm needed a huge solution. This is so to make bigger pieces. Therefore, Delta WASP 4070 INDUSTRIAL 4.0 3D printing machine has become a section of the firm’s design and manufacturing workflow.
Every month, the firm can make around 15 or 20 pieces for its fitness gear prototypes that measure 30 cm. This is while cutting the errors in the product development phase.